CPAP Battery Pack RPS II Kit for Air10™ and S9™ Series

No outlet? No problem. The RPS II is an all-in-one pack that provides power to ResMed ventilators and sleep therapy devices. Great for boating, camping, flying or when there is a power outage. Ability to provide external power for the Airsense 

Convenient and portable

• Weighs only two lbs and is easily transported in the RPS II carry bag

• Suitable for use in both the home and hospital

• Ideal for travel or when additional mobility and freedom are required, such as on the back of a wheelchair

Powering your device

• Provides battery power for your ResMed device in case of power outages or where grid power is not available

• Plugs right into your ResMed device with the appropriate DC cable

Long-lasting power

• Provides up to 13 hours of run time on a single charge

• An external long-life, lithium-ion battery

• Can be charged to greater than 95% in less than four hours

Double your power

The power capacity and operation time can be doubled by using two batteries simultaneously with the RPS II battery coupler.

TECHNICAL SPECIFICATIONS

Battery type: Lithium-ion
Recharge time: <4 hrs from fully empty to greater than 95%
Battery run time: Up to 13 hours†
Dimensions: (L x W x H) 9.06 x 4.96 x 1.02 in (230 x 126 x 26 mm)
Battery weight: 2.04 lbs (0.9 kg)
Power supply Input range: 100–240V, 50–60Hz, 1.0–1.5A
Nominal for aircraft use: 110V, 400Hz
Battery output voltage: (24V/26V) ± 0.5V, 90W continuous
Power supply unit output current: (rated) 3.75A
Battery output current (rated): 3.75A/3.46A